In the package:
- 1x OM-0110CTRL
- 1x Bus cable
- 1x Quick start guide
The 0/1-10V Control module has 8 analogue outputs (0/1-10VDC) that can operate 8 analogue devices.
Warranty & Safety:
This product falls under the standard warranty terms, which can be found on our website. Any new installation or modification must be carried out by a certified installer and follow the applicable local rules and regulations.
The module is installed in a fuse box.
- Supply voltage: 24 VDC
- Operation temperature: 0 – 45°C
- Number of connections: 8
- Connector: 11-pin, type 2
- Supports “sourcing” 0-10V and “sinking” 1-10V devices: max. 10mA
- Common GND to connect to the analogue devices
- Outputs should not be connected to the mains voltage (230VAC)
System dimensions & limits:
For more information, check the datasheets via www.openmotics.com/en/documentation.