Description
In the package:
- 1x OM-MICROCAN
- 1x set cable bundles: input
- 1x set cable bundles: LED feedback
- 1x quick start guide
Function:
The micro CAN module collects the different inputs (push buttons as well as sensors) and sends them to the Brain, Brain+ and CAN Control module. In addition, this module can control up to 6 feedback LEDs.
Warranty & safety:
This product falls under the standard warranty terms, which can be found on our website. Any new installation or modification must be carried out by a certified installer and follow the applicable local rules and regulations.
Installation:
The module is installed in the flush-mounting box behind the push button.
Technical features:
- Power supply voltage: 24 VDC
- Operating temperature: 0° – 45°C
- Sensor:
- Sensor power supply output: 5VDC OUT & 3.3VDC OUT, 150mA max
- Sensors are supplied with the correct cables. The cables must not be extended.
- Short circuit protection: beeper active
- Input:
- Number: 6
- Max. voltage: 5VDC
- Digital output / LED feedback:
- Number: 6
- Max voltage: 24VDC
- Max current per output: 10mA
- Attention: the LEDs must support 24VDC
- CAN bus:
- Cabling: if bus length <150m: EIB (2x2x0.8) twisted or UTP min. Cat5e, if bus length >150m: UTP min. Cat5e
- Max. cable length: 250m
- Max. current per CAN bus: 700mA
- Max. number of modules on a bus: 25
System dimensions & limits:
For more information, check the datasheets via www.openmotics.com/en/documentation.