In the package:
- 1x OM-RELAY
- 1x bus cable
- 1x quick start guide
The Relay module has 8 internal bistable relays that can switch both normal loads and motors for blinds and curtains, or that can be used as potential-free outputs. This module can only be used as part of an OpenMotics installation.
Waranty & safety:
This product falls under the standard warranty terms, which can be found on our website. Any new installation or modification must be carried out by a certified installer and follow the applicable local rules and regulations.
The module is installed in a fuse box.
- Supply voltage: 24 VDC
- Operating temperature: 0 – 45°C
- Number of relays: 8
- Connector: 4×4 pin, type 1
- Max. load per bank of 2 relays with 1 shared common connection 16A (230VAC)
- Max. load per relay: 16A (230VAC) resistive
- Max. switching voltage: 277VAC
- Inrush current limiter: 100A
System dimensions & limits:
For more information about the system dimensions and limits, please refer to the data sheets via the link https://www.openmotics.com/en/documentation.