Our handy cabling options allow you to easily & quickly wire the bus and power connections of your OpenMotics modules, a real time saver!
This cable connects the Bus and Power connections of an OpenMotics 6T module with the OpenMotics module to its left (regardless of that module’s width), except if that module is the Gateway (if so, use a “Bus & Power Cable (G6T)” instead).
You’ll need 1 “Bus & Power Cable (6T)” for every OpenMotics module in your installation that is 6T wide (e.g. Output, etc.).
Cable length: 122mm
There are 4 variants of these Bus & Power Cables available:
Bus & Power Cable (6T)
Connect a 6T wide module with the module to its left